A single-pole low-pass with its corner at 995 Hz
Drawn above at its default parameters, which is almost never how an essay calls it. A placement states the numbers that essay is arguing about, so the figure a reader meets is about that argument rather than about the generator — 98% of the placements on this site pass one, and the phase that raised that number from 12% found eight captions describing a figure the page was not showing.
At those defaults the edge it states is the sketch is 3.01 dB wrong at 995 Hz — the right-hand slot
of the caption strip, which on this site is never used for anything else, and which is read
back out of the drawing above rather than out of the code that wrote it.
It belongs to Frequency, which is the same solve, which is to say a change to it is a
change to lib/figures/frequency.js.
It takes a slider on capacitance (farads) with 7 settings,
and every one of them has passed the same assertions as the frame above — a figure whose
circuit stops doing what its caption says at any setting stops the build.
Called by 8 essays
which is the blast radius of changing it
One solve, read four ways
Reactance, phase, the corner frequency and the roll-off are not four ideas. They are four readings of one complex number, obtained from the same matrix that answers direct-current questions — and the straight-line sketch every engineer draws of them is itself a model, three decibels wrong exactly where it is read.
The corner that says nothing about an edge
An AC-coupled input is sold on a low-frequency corner, and a corner is a statement about steady sinusoids. What an instrument is usually shown is a pulse, and for a pulse the number is a sag: a hundred-millisecond pulse through a 0.159 hertz corner comes out 9.5 per cent shorter than it went in. A one per cent flat top needs a pulse rate 625 times the corner, which is a constant with no component in it — and above fifty per cent duty an AC-coupled pulse never reaches half its own height at all.
The phase the magnitude already knows
For one class of network the phase is not an independent measurement: it is fixed everywhere by the magnitude, through an integral Bode wrote down in 1945. Fed nothing but the magnitudes of a solved lead network, that integral returns 39.289 degrees at the corner against a solved 39.289, and tracks the whole curve to two hundredths of a degree. Cascade an all-pass and the magnitudes agree to the last bits of a double while the phases part by 180 degrees — so the recovery is exact for one of the two and cannot see the other at all.
The straight lines, and where they are not the curve
Two straight lines through a corner is the most-used approximation in this subject and almost the only one with no number attached. It has one, and it is exact: at a single real pole the sketch is 3.0103 decibels high at the corner and nowhere worse, and its error is the same a factor above the corner as the same factor below — a symmetry the construction does not suggest. A pole pair has no such bound at all, and the best any two-slope sketch can do on one is 0.770 decibels, at a quality factor of 0.9152.
Four readings of one distance
Reactance, phase, the corner frequency and the roll-off are four readings of one complex number, and the number has a geometry. A single pole's magnitude is the pole's distance from the origin divided by its distance from the point on the imaginary axis, and the phase is minus the angle that separation subtends — agreeing with the nodal solve to a part in 10¹² over five decades. So the corner is where the distance is root two times its smallest, the roll-off is the distance becoming omega, the flat passband is the distance not yet changing, and the phase is the angle. One distance, four readings.
The circle a peak sits on
A pole pair's response at a frequency is ω₀² over the product of two distances — from the point on the imaginary axis to each pole — to a part in 10¹⁵ of the nodal solve. That turns a resonance into geometry. The peak is where a circle centred on the pair's real part and through both poles meets the axis: at Q = 2, 0.9354 of ω₀ and a height of 2.0656, found the same by a search. The quality factor is an angle, Q = 1/(2 cos θ), and a peak exists exactly when the pair is closer to the imaginary axis than to the real one — past forty-five degrees. The half-power width is where the short leg has grown by √2, twice the pair's distance from the axis. And the step, marched, rings at the pole's height and decays at its distance: a projection, not a length.
A tolerance is an arrow
Change one part of a series RLC low-pass by one per cent and its pole pair moves by a few ten-thousandths of ω₀ — and the response moves by the displacement projected onto the two distances that make it, to within four per cent of the solve. The direction is set by the part. A resistor moves the pair round its circle, away from the axis, and is felt at the peak: 0.99 per cent at Q = 5. A capacitor moves it straight down, parallel to the axis, and is felt beside the peak: +1.78 and −3.20 per cent at the half-power points and almost nothing at the peak itself. Because the short leg is ω₀/2Q long, the capacitor's effect grows by half a per cent for every unit of Q, to 10.1 per cent at Q = 20. Two hundred builds from 1% parts spread by ±2.5 per cent at the band edge.
Two parts that drift together
A one per cent change in the inductor of a Q = 5 resonant low-pass moves its pole pair mostly downwards, and the response by 2.73% beside the peak. Let the capacitor fall by the same fraction as the inductor rises and their product is fixed, so ω₀ is: the pair can only go round its circle, sideways near the top, and the response changes by 1.00% at the peak and nowhere else — the change a resistor makes. The difference grows with Q: at Q = 20 one per cent of drift moves the band edge 10.2% with the capacitor held, 20.7% with it drifting the same way, and 1.00% with it tracking. Over −40 to 85 °C an inductor of +150 ppm/K moves a Q = 20 band edge 9.1% with a zero-coefficient capacitor and 0.57% with a −150 ppm/K one. Correlation between two parts' errors is itself a tolerance.