Concept

Trimmer — where it appears

An adjustable component, usually a small capacitor or resistor, set once on the bench to cancel the error of the parts around it. It can null only the error it has a handle on, so one trimmer cancels one term and leaves any second time constant or second law untouched.

Named by 3 essays across one field — each of them below, with the objects they name alongside it.

A 10:1 divider with 12.8 pF across its top resistor. computed by solving, not by drawing. The divider's resistors set a ratio of 0.10000 and its capacitors 0.10000; the step starts at the second and relaxes to the first over 115 µs. The balance R₁C₁/R₂C₂ is 1.0000, and the edge lands 0.00% away from where it settles. At 12.8 pF the two ratios are the same number and the response is flat.

A divider with two ratios

Put capacitance in a resistive divider and it divides by resistance at direct current and by capacitance at high frequency, and those are two different numbers unless one equation holds. The adjustable trimmer on every oscilloscope probe exists for that single equation, and the square wave on the instrument's front panel is a display of which of the two ratios is currently winning.

instruments · Compensation

A 10:1 divider into 100 pF and 15 pF more behind 1.0 kΩ, trimmed for the calibrator, on a 1 ns edge. computed by solving, not by drawing from the residues of its four poles, on a time axis from 0.1 ns to 1 ms. The trimmer is set to 12.8 pF, where a 1 kHz square wave reads flat: the upper arm then matches the lower arm's total of 115 pF. On a 1 ns edge the output overshoots to 1.128 times where it settles, because for the first few nanoseconds the late 15 pF is not yet part of the divider, and falls back over that branch's own time constant, 15 ns, within 1% only by 35.5 ns. With a second branch in the upper arm, 9.0 kΩ and 1.7 pF — a scaled copy of the late branch — the same edge is flat to 7.0e-11 (dashed).

The time constant one trimmer cannot reach

A ten-to-one divider whose lower arm is 100 pF of instrument input and 15 pF more reached through a kilohm reads flat on a 1 kHz calibrator with its trimmer at 12.8 pF — the same setting as a lower arm of 115 pF lumped — and overshoots 12.8% on a 1 ns edge, settling within 1% only after 35.5 ns. No setting of the one trimmer is flat: the best judged on a fast edge is 6.1%, at 11.9 pF, and a trimmer set by eye so the fast edge lands flat leaves the calibrator's square wave 9.9% low with a 114 µs slope on its top. Flat at every time needs the upper arm to be a scaled copy of the lower one — a second branch of 9 kΩ and 1.7 pF — and then a 1 ns edge is flat to 10⁻¹⁰, with a window of −18 to +24% on that resistor and ±6% on its capacitor.

instruments · Compensation

A ten-to-one divider with 15 pF of its arm behind a kilohm, stepped through 1 kΩ: one trimmer overshoots 0.00936% where an ideal source shows 13.2%, and the second branch that was exact no longer settles first. computed by solving, not by drawing: the step of the divider of the earlier essay, 9 MΩ and a trimmer over 1 MΩ with 100 pF direct and 15 pF behind a kilohm, through a source resistance of 1 kΩ, by residues. One trimmer at its calibrator setting (solid) overshoots 0.00936%, and the second branch that made the arm a scaled copy (dashed) rises without overshoot on the source's own lag. An ideal source (dotted) shows a 13.2% hook with one trimmer and nothing with two. A source resistance charges the input capacitance, 11.5 pF, so its lag and the hook act on one edge, and when they are comparable the hook's excess goes into shortening the lag.

The source the hook hides behind

A compensated divider with a late branch in its lower arm overshoots 13.2 per cent on an ideal step, and every measurement of that hook has been made from a source with no resistance. Through a real source the input capacitance charges first, and the hook and the source's lag act on the same edge. The overshoot is 10.5 per cent from 50 Ω, 4.13 from 300 Ω and gone by a kilohm, where the source's lag equals the hook's. The excess has not gone away: it is in the edge, which the screen shows 15 per cent faster than the source and the probe's capacitance allow. And the second branch that made the divider exact only makes its ratio exact, so from a kilohm the exact divider settles in 65.6 ns and the one with the hook in 44.

instruments · Compensation

Named alongside it

The objects these essays reach for when they reach for this one.

Compensated divider Step response Attenuator probe Overcompensation Residues Time constant matching Input capacitance Model range Source impedance

All concepts