Circuit Response
every model has an edge, and the figure carries it
Concept

Comparator — where it appears

An amplifier used to decide which of two inputs is larger, whose output is one rail or the other. Its useful specifications are the ones an amplifier's are not: how long it takes to decide, how much its two decisions differ, and how much noise sits under the threshold it is deciding against.

Named by 3 essays across one field — each of them below, with the objects they name alongside it.

A threshold crossed once, in 20k samples of noise. With no hysteresis the comparator changes its mind 22.7 times on average and as many as 29, on a signal that crosses the threshold once. The vertical bars are the range over twelve seeds. The expected number of extra transitions falls below a tenth at 3.57 standard deviations — so the hysteresis a threshold needs is set by the noise under it and not by the signal over it.

Two thresholds because there is a floor

A comparator with one threshold, watching a slow signal cross it once, changes its mind 22.7 times on average and as many as 29 — because there is noise under the signal and no threshold is ever crossed once. Hysteresis fixes it, and how much is needed is a multiple of the noise's own standard deviation rather than a voltage: 3.57 of them here. The multiple grows with how long the threshold is watched, and slowly — a hundredfold longer record needs three times the hysteresis, not a hundred times.

applied · Hysteresis The period's spread is 1.20 times what counting two crossings gives. computed by solving, not by drawing. 19999 periods of a relaxation oscillator with 5 mV rms of noise on its thresholds, computed from the exact flip instants rather than marched, at β = 0.5. The measured standard deviation is 3.4 ns and the closed form — three partial derivatives of the period with respect to the three draws it depends on — gives 3.4 ns. The estimate that counts two threshold crossings and divides the noise by the slope at each gives 2.83 ns, which is 17 per cent low. The curve is the closed form's Gaussian, drawn on the measured histogram rather than fitted to it.

The decision taken where the ramp is slowest

A relaxation oscillator decides at its thresholds, and a threshold is the one place on a charging exponential where the slope is smallest. Noise there costs 3.399 units of period against the 2.828 that counting two crossings gives, because a draw moves the crossing it is armed for and the level the next ramp starts from. Consecutive periods share that draw, so they are positively correlated and the jitter accumulates at 3.771 per root period rather than at 3.399. And at a fixed frequency there is a best hysteresis: β = 0.648, where β·ln((1+β)/(1−β)) = 1.

applied · Hysteresis At β = 0.5, the duty error scatters by 2.49 ns a period against the period's 3.39 ns — and consecutive duty errors are anticorrelated, −0.217. Seeded: forty thousand periods of the event map with 5 mV of threshold noise, β = 0.5. The period scatters by 3.39 ns against σ√(A² + (A+B)² + B²) = 3.4 ns; the high half less the low half scatters by 2.49 ns against σ√(A² + (B−A)² + B²) = 2.49 ns, with A = RC/V(1+β) and B = RC/V(1−β) — 0.667 and 2.000 in units of RC/V. The draw both halves share enters the period with A + B and the difference with B − A. Consecutive periods correlate by 0.107 (closed form 0.115); consecutive duty errors by −0.217 (closed form −0.214).

The walk the core sees

Threshold noise in a relaxation oscillator walks its timing at 3.77 nanoseconds per root period at β = 0.5, because the draw two half cycles share adds. A transformer driven by the same square wave sees the difference of the halves instead, where the shared draw subtracts, and that walks at 1.89 — exactly β times the timing, 18.3 ns against 35.9 after a hundred periods over six hundred seeded runs. The per-period duty error does not vanish with the hysteresis and the walk does, consecutive duty errors are anticorrelated where consecutive periods are not, a comparator skew outruns the walk after 2(σB/d)² periods, and at a fixed frequency the core wants less hysteresis than the clock does.

applied · Hysteresis

Named alongside it

The objects these essays reach for when they reach for this one.

HysteresisSeeded generatorDesign tradeoffNoise floorPeriod jitterRelaxation oscillatorDuty cycleMonte carloVerificationVolt-secondsVoltage divider

All concepts