Circuit Response
every model has an edge, and the figure carries it
Concept

Duty cycle — where it appears

The fraction of each period during which a switched quantity is present. It converts a peak into an average, and whether the average is the quantity that matters depends on how the period compares with the time constant of whatever the average is being asked about.

Named by 5 essays across 4 fields — each of them below, with the objects they name alongside it.

A 100 ms pulse through a 0.159 Hz corner, 9.52% shorter by the end of it. computed by solving, not by drawing. Marched. The dashed line is the pulse that was sent. The solid line is what a 1 MΩ input with 1 µF in front of it receives: the top decays as exp(−t/RC) for the whole 100 ms, ending 9.515% down, and the trailing edge undershoots by exactly the same amount. The closed form for the same two components gives 9.516%. The input's specification is a corner at 0.159 Hz; a top flat to one per cent needs a pulse shorter than 10.1 ms, which is a rate 625.2 times the corner — a constant with no component in it, and the reason a low-frequency specification says nothing useful about an edge.

The corner that says nothing about an edge

An AC-coupled input is sold on a low-frequency corner, and a corner is a statement about steady sinusoids. What an instrument is usually shown is a pulse, and for a pulse the number is a sag: a hundred-millisecond pulse through a 0.159 hertz corner comes out 9.5 per cent shorter than it went in. A one per cent flat top needs a pulse rate 625 times the corner, which is a constant with no component in it — and above fifty per cent duty an AC-coupled pulse never reaches half its own height at all.

instruments · Ac coupling Twenty nanoseconds of skew is 0.28% of duty, not 0.40. computed by solving, not by drawing. The duty cycle of a relaxation oscillator whose comparator takes longer to go one way than the other, marched, against the expression that lengthens each half cycle by its own delay. The two part company immediately and by a constant factor of about 1.42: during a delay the capacitor keeps charging past the threshold it already crossed, so the next half cycle starts further out and takes longer, and the two halves partly cancel. At 200 ns of skew on a 2585 ns period the duty is 52.805 per cent where the expression says 54.004. The open circles are the same quantity in closed form — the overshoot is V(1 − (1 − β)e^(−d/τ)) and the next half starts from it — which the march reproduces to parts in ten thousand.

The delay that is two delays

Modelling one comparator delay applied to both transitions makes the two half cycles equal by construction, and the fix is a change of one line. Made, the duty cycle moves by 0.28 per cent for twenty nanoseconds of skew rather than the 0.40 the obvious expression gives, more hysteresis improves the duty cycle and worsens the volt-seconds at the same time, and ten nanoseconds of skew saturates a hundred-turn core in 231 cycles.

applied · Hysteresis The frequency at which a pulse train becomes an average. computed by solving, not by drawing. The same 5 watts of average dissipation at every frequency, delivered 2 per cent at a time. The flat line is the steady-state answer, which does not know about the frequency. The falling curve is the marched peak junction temperature, which does. They meet at 308 Hz, and that frequency is not a property of the converter: it is a fraction of one junction time constant per period — f·τ = 0.738 at this duty, with τ = 2.40 ms, and between 0.78 and 0.56 across the duties on the slider. A hundred-kilohertz converter fits 240 periods inside that time constant, and at the top of the sweep — 10.0 kHz — the steady state is already exact to 0.46 per cent, so the averaged-power fixed point is right and this is the measurement that says why. The march puts 48 steps inside each pulse, which is what the answer is sensitive to: at six it put the boundary 19 per cent too high.

The pulse the heatsink does not feel

A thermal resistance iterated to a fixed point with a diode or a switch is a statement about a power — so it assumes that a hundred and fifty watts for two per cent of the time is three watts. The die's own heat capacity decides whether that is true, and it decides it at a frequency: above 308 hertz the junction integrates, by a hundred kilohertz the fixed point is exact to five parts in ten thousand, and at one hertz the same average power on the same heatsink puts the junction three hundred kelvin hotter.

transients · Reverse-recovery A 4.0:1 flux slope ratio and a sinusoid enclose the same loop to 0.00%. computed by solving, not by drawing. A core driven in flux rather than in field — the way a winding drives it, by integrating a rectangular voltage — around a triangle of ±100 millitesla at a duty cycle of 0.2, whose two slopes differ by 4.00 to one. The loop it traces encloses 2.1006 joules per cubic metre, against 2.1007 for a symmetric triangle and 2.1006 for a sinusoid of the same peak: the same number to 0.001 per cent. That is not an approximation, it is a theorem about the model — a rate-independent locus depends on where the flux went and not on how fast — and it is the prediction that real cores disagree with by tens of per cent. The disagreement is the measurement of what the model has left out.

The duty cycle that costs nothing

A converter drives its core with a rectangular voltage, so the flux is a triangle whose two slopes differ by nineteen to one at a five per cent duty. The play-operator core charges exactly the same for all of them — 2.1006 joules per cubic metre at every duty and for a sinusoid of the same peak, to three parts in ten thousand — because a rate-independent locus depends on where the flux went and not on how fast. Real cores charge tens of per cent more, and the standard correction hides its entire waveform dependence in α − 1, which is the one term a rate-independent model has none of.

magnetics · Magnetic loss At β = 0.5, the duty error scatters by 2.49 ns a period against the period's 3.39 ns — and consecutive duty errors are anticorrelated, −0.217. Seeded: forty thousand periods of the event map with 5 mV of threshold noise, β = 0.5. The period scatters by 3.39 ns against σ√(A² + (A+B)² + B²) = 3.4 ns; the high half less the low half scatters by 2.49 ns against σ√(A² + (B−A)² + B²) = 2.49 ns, with A = RC/V(1+β) and B = RC/V(1−β) — 0.667 and 2.000 in units of RC/V. The draw both halves share enters the period with A + B and the difference with B − A. Consecutive periods correlate by 0.107 (closed form 0.115); consecutive duty errors by −0.217 (closed form −0.214).

The walk the core sees

Threshold noise in a relaxation oscillator walks its timing at 3.77 nanoseconds per root period at β = 0.5, because the draw two half cycles share adds. A transformer driven by the same square wave sees the difference of the halves instead, where the shared draw subtracts, and that walks at 1.89 — exactly β times the timing, 18.3 ns against 35.9 after a hundred periods over six hundred seeded runs. The per-period duty error does not vanish with the hysteresis and the walk does, consecutive duty errors are anticorrelated where consecutive periods are not, a comparator skew outruns the walk after 2(σB/d)² periods, and at a fixed frequency the core wants less hysteresis than the clock does.

applied · Hysteresis

Named alongside it

The objects these essays reach for when they reach for this one.

Model rangeVolt-secondsFlux densityHysteresisMarchingAc couplingB h loopBaseline shiftCharging exponentialComparatorCorner frequencyDesign tradeoff

All concepts