Circuit Response
every model has an edge, and the figure carries it
Concept

All-pass — where it appears

A network whose magnitude is one at every frequency, so that everything it does to a signal is a phase shift. It is used to correct a delay that another network has already spoiled, and it adds delay of its own to do so.

Named by 4 essays across 2 fields — each of them below, with the objects they name alongside it.

A fifth-order chebyshev delay, and 1 all-pass section in front of it. computed by solving, not by drawing at 60 frequencies across the passband. The delay varies by 891 µs from end to end; 1 all-pass section, with pole pair found by search rather than taken from a table, brings that to 498 µs — a factor of 1.79. The price is that everything is later: 722 µs more at direct current, which is more than the 392 µs of variation removed.

Flat delay, bought with more delay

An all-pass section has a magnitude of one at every frequency — measured here on a solved network as 1 to within 9 × 10⁻¹⁶ over six decades — which makes it the only thing that can change a filter's delay without touching its magnitude response. It flattens by adding. A fifth-order Chebyshev's 891 microseconds of delay variation comes down to 498, and everything leaves 722 microseconds later than it did.

filters · Group delay One magnitude curve, two phase curves, and the one of them the magnitude decides. computed by solving, not by drawing. A passive lead network — a resistor with a capacitor across it, over a second resistor, its zero at 1.00 kHz — and the same network followed by a first-order all-pass. The two magnitudes agree to the last bits of a double at every one of the 1601 frequencies sampled, and the phases differ by as much as 180°. Bode's gain–phase integral, fed the magnitudes alone with their phases discarded, returns 39.29° at the corner against a solved 39.29°, and tracks the minimum-phase curve to 0.02° across the band — while being wrong about the second network by the all-pass's own phase, which is what excess phase means. The edge here is the span of the sweep rather than a frequency of the circuit: ±3 decades of magnitude carries 99.92% of the integral's weight, and what is left out is the tail of a logarithm.

The phase the magnitude already knows

For one class of network the phase is not an independent measurement: it is fixed everywhere by the magnitude, through an integral Bode wrote down in 1945. Fed nothing but the magnitudes of a solved lead network, that integral returns 39.289 degrees at the corner against a solved 39.289, and tracks the whole curve to two hundredths of a degree. Cascade an all-pass and the magnitudes agree to the last bits of a double while the phases part by 180 degrees — so the recovery is exact for one of the two and cannot see the other at all.

frequency · Minimum-phase 40.0 dB of gain change and 180.0 degree-decades of phase, peaking at 109.8°. computed by solving, not by drawing. The gain and the phase of two leads of 10:1, together, each section buffered from the next. The gain changes by 40.000 dB from one end of the sweep to the other. The area under the phase, integrated on the solve over seven decades beyond the outermost corner, is 180.000 degree-decades, against 180.000 for ninety per twenty decibels of gain change. The peak is 109.806° at 3.16 kHz, below the 131.93° no arrangement of real leads sharing that rise can pass.

The phase a decibel buys

The area under a minimum-phase network's phase, counted in degrees across decades of frequency, is fixed by how far its gain moves from one end of the spectrum to the other: ninety degree-decades for every twenty decibels, however the network is arranged. One 100:1 lead peaks at 78.579 degrees and two 10:1 leads stacked together at 109.806, and both enclose 180.000. The peak is a design decision and the area is a bill — and a network that gives its gain back gives its phase back with it.

frequency · Minimum-phase Two networks of one magnitude deliver the same energy, and the minimum-phase one delivers half of it 5.61 times sooner. computed by solving, not by drawing. A low-pass with poles at 1.00 kHz and 10.0 kHz and a zero at 3.00 kHz, and the same network with an all-pass behind it that moves the zero into the right half-plane. Their magnitudes agree at every frequency sampled to 4.4e-16. The energy of each impulse response, from the residues in closed form, is 6029.319 for both, and the integral of |H|² over frequency gives 6029.305. What differs is when it arrives: the minimum-phase network has delivered half its energy by 11.27 µs and its mirror by 63.23 µs; by 20 µs the fractions are 0.658 and 0.352, by 100 µs 0.918 and 0.676; and at no instant has the mirror delivered more.

The energy that arrives first

Two networks with the same magnitude at every frequency have the same impulse-response energy, and Parseval's theorem says so before either is solved. They do not deliver it on the same schedule. A low-pass with poles at one and ten kilohertz and a zero at three delivers half its energy by 11.27 microseconds; the same network with its zero mirrored into the right half-plane, which changes no magnitude anywhere, takes 63.23, and at no instant has it delivered more. Its step response starts the wrong way, to −0.170 of the final value, before it turns round. Minimum phase is minimum delay, and the delay is in the energy rather than in any one number a frequency plot shows.

frequency · Minimum-phase

Named alongside it

The objects these essays reach for when they reach for this one.

Excess phaseGroup delayMinimum-phaseBode plotGain phase relationAsymptotic approximationDelay equalisationFilter familiesLead compensationPhase linearityPhase marginPole-zero mirror

All concepts