Circuit Response
every model has an edge, and the figure carries it
Concept

Asymptotic approximation — where it appears

A model that is exact only far from the region it is usually read in, such as the straight-line sketch of a response near its corner. Its usefulness is a range rather than an accuracy, and this collection measures that range instead of quoting the expression alone.

Named by 9 essays across 3 fields — each of them below, with the objects they name alongside it.

A single-pole low-pass with its corner at 995 Hz. Solved at 209 frequencies. The straight-line sketch, drawn faintly, is 3.01 dB wrong at the corner and within a tenth of a decibel only below 152 Hz. The phase is already −5.7° a decade before the corner and −84° a decade after it.

One solve, read four ways

Reactance, phase, the corner frequency and the roll-off are not four ideas. They are four readings of one complex number, obtained from the same matrix that answers direct-current questions — and the straight-line sketch every engineer draws of them is itself a model, three decibels wrong exactly where it is read.

frequency · Frequency response One magnitude curve, two phase curves, and the one of them the magnitude decides. computed by solving, not by drawing. A passive lead network — a resistor with a capacitor across it, over a second resistor, its zero at 1.00 kHz — and the same network followed by a first-order all-pass. The two magnitudes agree to the last bits of a double at every one of the 1601 frequencies sampled, and the phases differ by as much as 180°. Bode's gain–phase integral, fed the magnitudes alone with their phases discarded, returns 39.29° at the corner against a solved 39.29°, and tracks the minimum-phase curve to 0.02° across the band — while being wrong about the second network by the all-pass's own phase, which is what excess phase means. The edge here is the span of the sweep rather than a frequency of the circuit: ±3 decades of magnitude carries 99.92% of the integral's weight, and what is left out is the tail of a logarithm.

The phase the magnitude already knows

For one class of network the phase is not an independent measurement: it is fixed everywhere by the magnitude, through an integral Bode wrote down in 1945. Fed nothing but the magnitudes of a solved lead network, that integral returns 39.289 degrees at the corner against a solved 39.289, and tracks the whole curve to two hundredths of a degree. Cascade an all-pass and the magnitudes agree to the last bits of a double while the phases part by 180 degrees — so the recovery is exact for one of the two and cannot see the other at all.

frequency · Minimum-phase The reverse peak reaches the forward current at 12.6 A/µs. computed by solving, not by drawing. The peak current a diode conducts backwards while its stored charge is removed, against the rate the external circuit drives its current down. The charge equation is integrated in closed form and marched trapezoidally, and the two agree to a part in a thousand. Drawn over it are the two expressions that describe the limits: √(2·IF·a·τ), which is what a reference gives and which is 16.7% high at this slope, and aτ, which contains no forward current at all and is what the peak approaches when the ramp is slow. At 100 A/µs the junction goes on conducting for 48.3 ns and reaches 3.83 A backwards — 3.83 times the current it was carrying forwards — and the two are equal at 12.6 A/µs.

The diode that conducts backwards

Every diode in this collection is an instantaneous function of its own voltage, which is exact for an operating point and has no time in it at all. A conducting junction holds a charge, and until that charge is gone it cannot block: drive its current down at a hundred amperes a microsecond and it conducts 3.83 amperes backwards for 48 nanoseconds, against the one ampere it was carrying forwards. The expression every reference gives for that peak is 17 per cent high there, and is right to a per cent only above sixteen thousand amperes a microsecond.

transients · Reverse-recovery A pair at Q = 0.7071: the sketch is -3.01 dB out at the corner. computed by solving, not by drawing. The solved magnitude against the two straight lines that stand in for it. At a conjugate pair the error at the corner is 20 log Q = -3.010 dB, which is unbounded in both directions, and the worst error anywhere is 3.010 dB at 1.00× the corner. No damping brings it inside 0.770 dB: that is the minimax, at Q = 0.9152, where the corner error and an interior maximum are equal.

The straight lines, and where they are not the curve

Two straight lines through a corner is the most-used approximation in this subject and almost the only one with no number attached. It has one, and it is exact: at a single real pole the sketch is 3.0103 decibels high at the corner and nowhere worse, and its error is the same a factor above the corner as the same factor below — a symmetry the construction does not suggest. A pole pair has no such bound at all, and the best any two-slope sketch can do on one is 0.770 decibels, at a quality factor of 0.9152.

frequency · Asymptotic approximation Alternating-current resistance against foil thickness, 4 layers. computed by solving, not by drawing. The falling dashed curve is the direct-current resistance, which is what more copper buys. The solid curve is the alternating-current resistance at 100 kHz for a portion of 4 layers, and it turns over: past ξ = 0.663 skin depths, thicker foil has MORE resistance, not less. The minimum sits at 1.3368 times the direct-current resistance of the same foil, which is four thirds and is the same number for every layer count above one. The resistance per turn there is 2.016 against √m = 2.000, which is the law the layer count obeys.

The copper that makes it worse

The rung below measured one conductor pushing its own current to its rim, and there is nothing to optimise in it: thicker wire is always less resistance. Stack the conductors and the quantity changes character. Each layer sits in the field of the ones below it, the loss that field drives has no upper bound in the thickness, and the product turns over — so a portion of four layers has a best foil thickness, and above it more copper is more resistance. The best thickness is the fourth root of three over the square root of the layer count, in skin depths, and the penalty at it is four thirds for every layer count above one.

magnetics · Winding The straight lines report 45.00° of margin, and the solved loop has 51.83°. computed by solving, not by drawing. The gain and phase of a loop made of an integrator and one pole, the corner at 1.00 kHz, with the integrator set so that the straight-line asymptotes cross unity at 1.00 kHz. The solved loop crosses at 786 Hz instead. Read at the lines' crossover, with the phase taken from the solve, the margin is 45.00°; at the loop's own crossover it is 51.83°. Closed, the loop is stable: the largest real part among its closed-loop poles is -5.00e-1 of the corner's angular frequency. The solved gain never rises above its asymptotes, so the lines cannot report more margin than the loop has.

The margin the straight lines report

A phase margin read off a sketch is read where the straight lines cross unity, and that is not where the loop does. For an integrator and one real pole the lines report 45.00 degrees on a loop that has 51.83 — short, and always short, because a real pole's response never rises above its asymptotes. A pair that peaks reverses the sign and removes the bound: at a quality factor of two the lines report 71.57 degrees on a loop that has no margin at all, and at five they report 82.41 on a loop that is unstable.

frequency · Asymptotic approximation The straight lines report 6.02 dB of gain margin on a loop that has none. computed by solving, not by drawing. The gain and phase of a loop made of an integrator and a pair at Q = 2, the corner at 1.00 kHz, the integrator set so that the straight-line asymptotes cross unity at 500 Hz. The loop's phase passes −180° at 1.00 kHz. There the lines put the loop gain at −6.02 dB and the solve at 0.00 dB, so the gain margin they report is 6.02 dB against 0.00 dB. The difference is 6.0206 dB, which is 20 log Q exactly with Q = 2, at any integrator gain. Closed, the loop is on the edge: the largest real part among its poles is -5.87e-17 of the corner's angular frequency.

The gain margin the straight lines get exactly wrong

A phase margin read off the straight lines is wrong by an amount that depends on where the loop crosses unity. A gain margin read off them is not: for an integrator and a pole pair the phase passes −180° at the pair's own frequency whatever the gain, and the lines are out there by exactly 20 log Q — 6.0206 dB for two real poles, 13.98 dB at a quality factor of five, at every integrator gain drawn. The stability condition for the loop turns out to be the same inequality: it is stable exactly when the gain margin the lines report exceeds that error.

frequency · Asymptotic approximation An order-8 Butterworth: the whole sketch is 3.0103 dB out at the corner, and its 4 sections −5.85 to +8.17 dB. computed by solving, not by drawing. The error of the straight-line sketch against the solved response — for each buffered section of an order-8 Butterworth lowpass at 1.00 kHz, and for the whole cascade. At the corner the sections are out by −5.852 dB (Q = 0.5098), −4.418 dB (Q = 0.6013), −0.915 dB (Q = 0.9000), +8.175 dB (Q = 2.5629), which add to −3.0103 dB: the whole filter's error, the same 10 log 2 as a single pole. The whole sketch is never further out than that anywhere; the section with the highest quality factor is +8.343 dB out at 1.04 kHz. The quality factors multiply to 1/√2.

The corner error a filter hides in its sections

The straight lines of an eighth-order Butterworth filter are 3.0103 dB out at the corner and nowhere worse — the same as one pole, at every order. The lines of the four sections it is built from are out by −5.85, −4.42, −0.92 and +8.17 dB there, which must add to the whole because the sections multiply. The whole sketch never gets worse with order and the worst section's error grows as 20 log(n/π). And the section the sketch misrepresents most is the one whose frequency error moves the filter most: 0.312 dB for one per cent, against the 0.173 dB any section's stopband shift gives.

frequency · Asymptotic approximation Lead zero at 500 Hz: the lines over-report by at most 3.12° with the loop's phase, and short by up to 20.6°. computed by solving, not by drawing. The error in the phase margin read off the straight lines of an integrator, two poles at 1.00 kHz and a lead section with its zero at 500 Hz and its pole 10 times higher, against where the lines cross unity, measured in decades from the zero. Gaps are placements where the lines are flat at unity or the loop crosses more than once. Read with the loop's own phase the reading is over by at most +3.12°, with the lines crossing −0.01 decades from the zero on a loop with 73.4° of margin, and never over on any loop with 60° or less; it is short by as much as 20.65°. Read with the phase off its straight lines too, on loops with 60° or less, it is never over.

The zero that lifts the lines

A phase margin read off the straight lines of an all-pole loop can only be short, and the proof takes three steps. A lead section breaks two of them: a zero's response lies above its lines, and between a zero and its pole the phase rises. The two breaks pull opposite ways, and measured across every placement of the crossing, in every sweep drawn, they leave an over-report of at most 6.58°, on a loop with 87.5°; on loops with sixty degrees or less it never exceeds 1.52°. The phase sketch is another matter: with the lines crossing at a lead zero above the plant's corner, it reports 17.91° on a loop with 1.17°.

frequency · Asymptotic approximation

Named alongside it

The objects these essays reach for when they reach for this one.

Bode plotModel rangeThe quality factorCorner frequencyDamping ratioLoop gainPhase marginCrossover frequencyGain marginMinimum-phaseAll-passBiquad cascade

All concepts