Concept

Intermodulation — where it appears

What a nonlinear device produces at sums and differences of two or more input frequencies, rather than at multiples of one. The third-order products land beside the tones where no filter can reach them, and the second-order products land at the sum and the difference. Both are read by driving a transfer curve with two equal tones and transforming what comes out.

Named by 2 essays across one field — each of them below, with the objects they name alongside it.

Also named here as third-order intercept, two tone test — the same set of essays touches all of them, so they are one junction rather than several.

A pair's third-order intercept is 7.8 dB above anything it can produce. computed by solving, not by drawing. Two equal tones through a differential pair, transformed coherently so every product lands in a bin of its own. The fundamental rises with slope 1.000 and the third-order product with slope 3.000, both fitted over the decade marked, and the dashed extensions are the extrapolation a specification quotes. They meet at a drive of 4.00 thermal voltages and an output of 2.00 — against a largest output of 0.8108, which is 8/π² and is what two equal tones give through a limiter. The intercept is 7.84 dB above it, which is π²/4 exactly.

The point the device is never at

A device's linearity is specified by one number, and that number is a place on no curve. The third-order intercept is where two straight lines would cross if both went on being straight, and neither does. For a differential pair the crossing sits π²/4 — 7.84 decibels — above the largest output the device can produce at any drive whatever, and the arithmetic that says so contains no tail current and no temperature.

semiconductors · Distortion

Degeneration removes the second-order product 9 times less well than the third. computed by solving, not by drawing. Both intermodulation products of a degenerated stage at 5 mV a tone, against the degeneration factor. The second-order product falls as D⁻² — the straight reference is exactly that law, anchored at D = 1 — and the fitted exponent is -2.000. The third-order product falls faster, as D⁴/|3 − 2D|, which is one more power of D at large factors, and it collapses altogether at D = 1.5 where its coefficient changes sign. So the ratio between the two goes from 20.7 at D = 1 to 183 at D = 16: the more linear the stage is made, the more completely its distortion is the product this collection had never measured.

The product that is not the third

Every distortion result in this field is odd-order, and the two-tone machinery has computed the second-order product on every call since the day it was written and thrown it away. On a bare exponential it is the drive over twice the thermal voltage — 1.934 × 10⁻² of the fundamental at a millivolt, against 1.870 × 10⁻⁴ for the third-order product, a ratio of 4Vₜ/a and a hundred and three to one. A differential pair puts it at 6.2 × 10⁻¹⁶. And degeneration removes it as D⁻² where it removes the third order as D⁴/|3 − 2D|, so a stage linearised until its third-order product is negligible is a stage whose distortion is almost entirely the one nobody measured.

semiconductors · Distortion

Named alongside it

The objects these essays reach for when they reach for this one.

Design tradeoff Model range Third-order intercept Two tone test Emitter degeneration Even harmonic cancellation Gain compression Nonlinearity Power law fit Total harmonic distortion

All concepts