Concept

Stationary point — where it appears

A stationary point is a frequency at which a response's first derivative with respect to every component value is zero. On a doubly terminated ladder it is where the network delivers all the power the source has available, so a component error can only move the response down, and it does so as the square of the tolerance rather than in proportion.

Named by 2 essays across 2 fields — each of them below, with the objects they name alongside it.

At a stationary point a tolerance has a mean, not a spread. computed by solving, not by drawing. Six hundred ladders with every reactance drawn independently from ±1 per cent, measured at the ripple peak and at a frequency between the peaks. Away from the peak the distribution is centred on nominal and 325 of 600 are above it. At the peak none is: the whole distribution lies below, with a mean of -0.0030 per cent and a worst case of -0.0140. A yield calculation that assumes a symmetric spread at a frequency that has a stationary point is wrong in both directions at once — it allows parts above a limit that cannot exist, and it misses that the whole batch has moved.

The tolerance that can only take away

At a doubly terminated ladder's ripple peak the first derivative of the magnitude with respect to every reactance is zero to ten digits, which the rung below measured and which says nothing about how much the response moves. This says how: every second derivative is negative, so of six hundred ladders built from one per cent components not one is above nominal, the mean has shifted rather than the spread having grown, and doubling the tolerance quadruples the damage instead of doubling it.

networks · Sensitivity $The load alternates with parity between 1 and 1.9841, at every order. computed by solving, not by drawing. The last quotient of the continued fraction that turns a reflection polynomial into element values, which is the load resistance the design demands, drawn against order. A Butterworth returns exactly one at every order. A Chebyshev alternates: one at every odd order and 1.984056 at every even one, the same number each time, and it is the closed form (√(1+ε²)+ε)² to a part in 10¹⁵. The mechanism is in the last two rows of the panel. A lossless ladder is two resistances at direct current, so it must deliver the maximum available power there, which requires that zero be one of the frequencies the design reflects nothing at — and an even-order Chebyshev's reflection zeros are the roots of an even Chebyshev polynomial, none of which is zero. The synthesis stalls at order 9 for a Butterworth, which is why that series stops at eight.$

The termination an even order cannot have

Every even-order Chebyshev ladder terminates in 1.984056 times its source resistance at half a decibel of ripple, the same number at orders two, four, six and eight, and it is (√(1+ε²)+ε)² to a part in 10¹⁵. Building one between equal terminations instead — which is what a table of g-values and a matched pair gives — turns 0.5000 dB of ripple into 1.8123 at order four, deletes one of the passband maxima outright, and moves the worst tolerance corner from the 2.000 power of the component tolerance to the 1.109 power: a factor of 95 at one per cent parts.

filters · Filter termination

Named alongside it

The objects these essays reach for when they reach for this one.

Component sensitivity Adjoint network Available power Chebyshev Component tolerance Continued fraction expansion Device mismatch Doubly terminated ladder Equiripple Ladder filter Maximum power transfer Reflection coefficient

All concepts