Concept

Wavelength — where it appears

The distance a sinusoid travels along a line in one period: the propagation velocity divided by the frequency. A circuit is lumped when it is small against it and a line when it is not, so every judgement about whether to model a trace as a wire is a comparison with this length.

Named by 2 essays across 2 fields — each of them below, with the objects they name alongside it.

10.0 cm of track, solved as a lumped circuit and as a line. The two agree to 0.030% at 3.97 MHz, where the track is one degree long, and to 30.1% at 143 MHz, where it is a tenth of a wavelength. Above that the lumped model is not approximately right; it is describing a different object.

Kirchhoff's own frequency

The current law says the current entering a node equals the current leaving it at the same instant, which assumes the signal crosses the circuit in no time. It crosses at about two-thirds the speed of light, so the law has a frequency of its own — set by nothing but the physical size of the board.

limits · Lumped-element

20 sections imitating a 1 m line: its delay is 1% long at 318 MHz and its group delay at 185 MHz, and it passes nothing above 1.32 GHz. computed by solving, not by drawing, as a chain of 20 series inductors and shunt capacitors carrying the inductance and capacitance of a metre of 50 Ω line of delay 4.83 ns, terminated in 50 Ω at both ends, beside the Bloch phase of an endless chain, 2·arcsin of ω over the cutoff, a section. The chain's cutoff is the cutoff 2/√(LₛCₛ), 1.32 GHz. Its phase delay is too long by arcsin(x)/x − 1 with x = f over that cutoff, 1% at 318 MHz (x = 0.2417); its group delay by 1/√(1 − x²) − 1, 1% at 185 MHz (x = 0.1404). Well below cutoff the solved chain's delay follows the closed form; nearer it the fifty-ohm terminations, which are not the LC ladder's own impedance there, add a ripple. Ten sections per wavelength is 414 MHz for this chain.

The sections a wavelength needs

A ladder of inductors and capacitors is a line only below its own cutoff, 2/√(LC) of one section, and in the frequency domain how far below can be written down exactly: its delay is too long by arcsin(x)/x − 1 and its group delay by 1/√(1 − x²) − 1, where x is π over the number of sections per wavelength. One per cent of delay needs 13.0 sections per wavelength; one per cent of group delay, 22.4. The rule of ten per wavelength is 1.72 per cent slow in phase and 5.33 in group delay. Twenty sections imitating a metre of cable are a line to a per cent of group delay up to 185 megahertz and pass nothing at all above 1.32 gigahertz.

lines · Distributed vs lumped

Named alongside it

The objects these essays reach for when they reach for this one.

Transmission line Artificial delay line Convergence order Electrical length Group delay Lumped approximation Lumped-element Propagation delay Propagation velocity

All concepts