Concept

Current gain — where it appears

The ratio of a bipolar transistor's collector current to its base current, written β and typically a few hundred. It differs between devices and rises with temperature, so a base current drawn through a source resistance makes an offset that neither matches nor tracks the junctions.

Named by 2 essays across one field — each of them below, with the objects they name alongside it.

With Rₜₕ = 10 kΩ, a tenfold range of β moves the collector current by 17.3%. computed by solving, not by drawing. The collector current of a transistor biased from a 2 V Thévenin source through 1, 10 and 100 kΩ, with 4.7 kΩ in the collector, 1 kΩ in the emitter and a 12 V supply, against its current gain from 30 to 1000, each point a Newton solve of the netlist with both junctions in the device. Dotted: one resistor from the supply to the base, 876 kΩ, sized for the same current at β = 100; it is proportional to β until it saturates. With Rₜₕ = 10 kΩ the current moves by 17.3 per cent from β = 50 to 500.

The bias the gain does not set

A transistor's current gain varies tenfold across the parts one type number covers, and a bias network is judged by how little of that reaches the collector current. One resistor from the supply to the base passes all of it — 0.61 mA at β = 50, 1.16 at 100, and saturation from 200. The four-resistor network passes 98.5 per cent of a tenfold change with a 100 kΩ divider, 17.3 with 10 kΩ and 3.4 with 1 kΩ, and never less than the 1.78 per cent the ratio β/(β + 1) keeps however stiff the divider. Each tenfold cut in that spread costs a tenfold rise in the divider's standing current, so the design is a point on a hyperbola rather than a rule.

semiconductors · Operating point

A pair with 2.0% saturation-current mismatch, nulled at 300 K: trimmed by a constant it drifts 1.706 µV/K, trimmed by its load ratio 0.000 µV/K. computed by solving, not by drawing, at 31 temperatures — each a Newton solve of both junctions, a bisection for the tail current and a bisection for the input that nulls the output — a bipolar pair at 10 µA a side whose second transistor has 1.02 times the first's saturation current. Untrimmed (grey) it needs 511.9 µV at 300 K and 682.6 µV at 400 K. Trimmed at 300 K by subtracting a constant (dashed) it is zero there and 170.6 µV at 400 K, drifting 1.706 µV/K — the untrimmed offset's drift, untouched. Trimmed at 300 K by making the collector loads 1.02000 to one (solid) it is 0.0 µV at 400 K, drifting 0.000 µV/K. The load ratio acts inside the same logarithm the mismatch does, so it cancels the mismatch at every temperature, not at one.

The trim that takes the drift with it

A bipolar pair's offset from a saturation-current mismatch is proportional to absolute temperature, so trimming it to zero at one temperature can trim its drift to zero too — but only if the trim acts inside the same logarithm the mismatch does. Trimmed by its collector-load ratio, a 2% mismatched pair is zero from 250 to 400 K; trimmed by subtracting a constant after it, it drifts the same 1.706 µV/K it drifted untrimmed. Add 20 kΩ of source resistance and a 10% current-gain mismatch, and a fifth of the offset follows the current gain instead: the load trim now leaves −0.574 µV/K, the constant trim 1.256, and above 34 kΩ the constant trim is the better one. A trim cancels the drift of the share whose temperature law it shares and converts the rest; two knobs, set for value and slope, leave 11 µV of curvature.

semiconductors · Differential pair

Named alongside it

The objects these essays reach for when they reach for this one.

Design tradeoff Device matching Differential pair Input offset Negative feedback Newton raphson Offset drift Operating point Saturation Thermal voltage Thevenin equivalent Voltage divider

All concepts