Circuit Response
every model has an edge, and the figure carries it
Concept

Fringing field — where it appears

The flux that leaves an air gap sideways instead of crossing it directly, taking paths through the surrounding window and lowering the gap's reluctance. It raises the inductance above what the gap's own dimensions predict, and it dissipates in whatever copper happens to be standing in it.

Named by 4 essays across 2 fields — each of them below, with the objects they name alongside it.

Where four of this site's models stop being true. In order: the ideal operational amplifier at 1.42 kHz, a 10 V output at full amplitude at 7.96 kHz, Kirchhoff's laws on 10.0 cm at 3.97 MHz, the ideal 100 nF capacitor at 4.69 MHz. The fifth boundary is an amplitude rather than a frequency and cannot share this axis: a small-signal model is 1% wrong above 7.3 mV, at every frequency there is.

The edges that are lengths

Almost every boundary in this collection is a frequency or an amplitude, and both of those are things a circuit designer chooses. A handful are lengths — the 0.60 millimetres a gap's field reaches into a window, the 200 microns between a track and its plane, the 10 centimetres at which Kirchhoff's laws are a degree out — and they behave differently in one way that matters: nobody chooses them at the schematic, they are set by whoever builds the thing, and they appear in no netlist at all.

limits · Model edges The fringing field, and the turns standing in it. computed by solving, not by drawing. The slot on the left is the gap, cut through the centre leg to the core's own symmetry plane where the potential is zero. Flux crossing it does not stay in the slot: it bulges into the window and crosses the copper at right angles to the layers, which is the one direction Dowell's expression and every ladder in this collection assumes has no field in it. The turns are shaded by their own loss. The worst is turn 4, level with the gap, at 32.5 times its direct-current dissipation; the best is 1.39 times. Same wire, same current, same winding, and a spread of 23.4 between them.

The turns nearest the gap

A gapped inductor's flux does not turn a corner into the iron on its way out of the gap; it bulges into the window and crosses the copper at right angles to the layers. Four tenths of a millimetre from a one-millimetre gap, the worst turn of an eight-turn winding dissipates 37.5 times its direct-current loss and the winding as a whole 14.1 times. Move the same winding three millimetres further out and those become 2.9 and 2.4 — and the distance that governs it is 0.60 millimetres, which is not the gap length and does not scale with it.

magnetics · Winding field How much larger a gap is than its own length says. computed by solving, not by drawing. A magnetic circuit prices a gap as g/(µ₀A) and everybody knows that is low, because the flux bulges out of the sides. The usual repair is to add one gap length to each dimension of the gap's area, which is the dashed line. The measurement is the solid one: at a 0.3 mm gap in a 6 mm leg the true correction is 1.100 and the rule offers 1.050, so the rule supplies 50 per cent of a correction worth 10 per cent of the inductance; at 1.7 mm it supplies 85 per cent. The rule is not wrong so much as it is a rule whose accuracy depends on the thing it is correcting.

The gap that is bigger than it is

A magnetic circuit prices a gap as g/µ₀A and everybody knows that is low, because the flux bulges out of the sides. The usual repair — add one gap length to each dimension of the gap's area — supplies half the correction at a 0.3 mm gap and 85 per cent at 1.7 mm, on a correction worth 10 per cent of the inductance at the first and 33 at the second. It is not a rule that is right or wrong; it is a rule whose accuracy is a function of the very thing it is correcting.

magnetics · Magnetic path 3 gaps of 0.40 mm, where one of 1.20 would do. computed by solving, not by drawing. The same total gap, the same turns, the same core, and very nearly the same inductance — cut into 3 instead of one. Each gap now drops one part in 3 of the magnetomotive force, so the field it throws into the window is that much weaker; and because the field's own energy goes as its square, the loss it causes falls faster than the field does. The winding dissipates 3.00 times its direct-current loss here against 6.52 with a single gap, and its worst turn 3.7 against 13.3.

The gap that is three gaps

Reluctances in series add, so one gap of 1.2 millimetres and three of 0.4 are the same magnetic circuit: the same inductance, the same saturation current, the same energy in the air. They are not the same field. Solved in two dimensions, the winding beside the single gap dissipates 6.52 times its direct-current loss and its worst turn 13.3; beside three gaps those are 3.00 and 3.7. And there is a best number of gaps rather than a monotone gain — past three, spreading them along the leg brings each one close to a different part of the winding.

magnetics · Magnetic path

Named alongside it

The objects these essays reach for when they reach for this one.

Air gapDesign tradeoffField solutionMagnetic pathModel rangeProximity effectEnergy-storageHot spotReluctanceClosed formLumped-elementMeasurement condition

All concepts