Circuit Response
every model has an edge, and the figure carries it
Concept

Interwinding capacitance — where it appears

The capacitance between a transformer's two windings, which couples them by a route that has nothing to do with the magnetic path. It is what carries common-mode noise straight across an isolation barrier, and it sets an upper edge that no coupling coefficient improves.

Named by 4 essays across one field — each of them below, with the objects they name alongside it.

Which mechanism sets the upper edge, against the load. computed by solving, not by drawing. Two candidate upper edges drawn against the measurement. The one every textbook names is a resonance between the leakage inductance and the winding capacitance; the one that actually binds at ordinary loads is the leakage in series with the load, a first-order corner at R/2πL. At 50 Ω they are 80.4 kHz and 1.13 MHz — a factor of 14 apart — and the measurement follows the first, to 19.5% at worst across nine loads. They swap at about 1500 Ω, above which the resonance is the binding one and the usual picture is right — which is why a transformer feeding a high impedance behaves as the textbooks say and one feeding fifty ohms does not.

Which picture sets the upper edge

Every account of a transformer's high-frequency limit names the same mechanism: the leakage inductance resonating with the winding capacitance. At fifty ohms that resonance is at 1.13 MHz and the measured edge is at 81.3 kHz — a factor of fourteen away — because what actually binds is the leakage in series with the load, a first-order corner with no resonance in it at all. The two swap at about 1500 Ω, and both accounts are current because both are sometimes right.

magnetics · Transformer The load at which a transformer becomes a resonant circuit, at k = 0.99. computed by solving, not by drawing. The peak output of the same 1:1 transformer against its load, as a multiple of what the turns ratio would give. Below about a kilohm the load damps the leakage resonance, the peak is the plateau, and the ratio is one: there is a band, and it is what the rest of this field measures. Above it the damping goes and the response peaks — 1.18× at 832 kHz into 1500 Ω, rising to 8.80× at the light end. A transformer with voltage gain is not a transformer behaving badly; it is a resonant circuit, and asking for "the band" of one returns the skirts of a resonance. So the measurement reports that the response is peaked, rather than returning two edge frequencies in the wrong order.

Where the band goes entirely

The three essays before this one measure a transformer's band, and all three assume there is one. Past a few hundred ohms of load there is not: the leakage that sets the upper edge is also what damps the resonance behind it, and a lightly loaded, well-coupled transformer peaks at 3.03 times its own turns ratio. A passive component with voltage gain is not a transformer behaving badly. It is a resonant circuit, and asking for its band returns the skirts of a resonance.

magnetics · Transformer The winding window solved electrostatically, in two portions. computed by solving, not by drawing. The same cross-section the loss solve reads, read with ∇·(ε∇φ) = 0 instead. Two things are the opposite way round from the magnetic problem and both are the whole difference. The iron is now a Dirichlet boundary rather than a Neumann one — an earthed core is an equipotential, so the field meets it at right angles instead of running along it — and a conductor carries a prescribed potential rather than a prescribed current. The thin curves are equipotentials, which are contours of φ, so equal spacing is equal potential step and crowded curves are a strong field. The copper is shaded by the potential each foil sits at, which rises along the winding rather than being one number. Winding to winding this window is 926.9 picofarads a metre, and 89 per cent of the energy is inside insulation that occupies a fraction of the window.

The other half of the same window

The two-dimensional solve that settled what a winding's alternating-current resistance really is computed one of the window's two parameters and never mentioned the other. Read with Laplace instead of the vector potential, the same cross-section returns 926.9 picofarads a metre — and 89 per cent of that energy sits inside films that occupy 14.1 per cent of the window. The instrument agrees with a layered slab to three parts in ten thousand billion and converges on a real winding at order 1.34, and the reason for the shortfall is not the arithmetic but the corner of a conductor.

magnetics · Winding capacitance The trade, in the plane where both halves of it live. computed by solving, not by drawing. Leakage inductance across, interwinding capacitance up, both solved on the same cross-section with the same cells. The faint diagonals are lines of constant leakage-times-capacitance, so a design action that runs along one of them has bought nothing and only moved where the energy is kept. Interleaving runs at slope -0.78, which is nearly along them: six sections cut the leakage 21.3 fold and multiply the capacitance 11.0 fold, and the product moves by 1.94. What it does change is the winding's characteristic impedance, 95 ohms down to 6.2 — a factor of 15. Thickening the interlayer instead runs at -4.8, steeply across the diagonals, and moves the product 5.2 fold over the same sweep. It is the cheaper action by that measure and it is not free either: the millimetre it spends is a millimetre of window that is not copper.

Interleaving is a choice, not an improvement

Splitting a transformer's windings into six sections divides its leakage inductance by 21.4 and multiplies its winding-to-winding capacitance by 11.0. The product of the two — which is what sets the frequency the part stops being a transformer at — moves by 1.94, and the resonance it decides goes from 1.804 to 2.515 megahertz for all that work. What interleaving really changes is the winding's characteristic impedance, 95.2 ohms down to 6.2, and nobody quotes it.

magnetics · Winding capacitance

Named alongside it

The objects these essays reach for when they reach for this one.

Leakage inductanceDesign tradeoffEnergy-storageField solutionLoadingMeasurement conditionModel rangePermittivityResonanceTransformerCharacteristic impedanceCoupling coefficient

All concepts